Are asymmetric metal markings on the cone surface of ceramic femoral heads an indication of entrapped debris?

BACKGROUND: The probability of in vivo failure of ceramic hip joint implants is very low (0.004-0.05%). In addition to material flaws and overloading, improper handling during implantation can induce fractures of the ceramic ball head in the long term. Identifying the causes of an in vivo fracture contributes to improved understanding and potentially to further reduction of the fracture probability for patients. Asymmetric metal markings on the cone surface of in vivo ball head fractures have been reported. The question, therefore, is whether asymmetric loading is the sole cause or whether additional factors, specifically contamination entrapped in the taper fit, also contribute or are even the main cause. METHODS: The influence of the asymmetric physiological load configuration on resulting metal markings in the cone surface of an alumina femoral ball head with and without biological contaminants was investigated. Static and cyclic tests on ball heads were carried out in a load configuration of 0° (axisymmetric) and 40° in a physiological environment. The analysis of the metal marking was carried out to gain a better understanding of the processes that contribute to the generation of metal marking. Fractography was carried out to determine the fracture initiation of failed ball heads. RESULTS: Different types and sizes of residuals entrapped in the conical surface are shown to yield strongly asymmetric metal marking patterns. All heads tested without contaminants exhibited an almost homogenous distribution of residual metal markings around the circumference of the ceramic cone surface at the proximal end of the bore hole. The failure of ball heads that contained entrapped contaminants revealed a common fracture pattern. The site of fracture initiation on two of the failed heads was in the entrance region of the bore hole on the superior half of the head. CONCLUSION: Asymmetric metal markings observed on the ball heads tested in this investigation are most probably caused by the presence of contaminants entrapped in the taper fit. Homogenous metal mark distributions around the circumference indicate proper assembly of the ball head without entrapped contaminants. It should, however, be noted that different taper designs may possibly result in different marking patterns

Intravenous Immunoglobulin Prevents Murine Antibody-Mediated Acute Lung Injury at the Level of Neutrophil Reactive Oxygen Species (ROS) Production

Transfusion-related acute lung injury (TRALI) is a leading cause of transfusion-associated mortality that can occur with any type of transfusion and is thought to be primarily due to donor antibodies activating pulmonary neutrophils in recipients. Recently, a large prospective case controlled clinical study of cardiac surgery patients demonstrated that despite implementation of male donors, a high incidence of TRALI still occurred and suggested a need for additional interventions in susceptible patient populations. To examine if intravenous immunoglobulin (IVIg) may be effective, a murine model of antibody-mediated acute lung injury that approximates human TRALI was examined. When BALB/c mice were injected with the anti-major histocompatibility complex class I antibody 34-1-2s, mild shock (reduced rectal temperature) and respiratory distress (dyspnea) were observed and pre-treatment of the mice with 2 g/kg IVIg completely prevented these symptoms. To determine IVIg's usefulness to affect severe lung damage, SCID mice, previously shown to be hypersensitive to 34-1-2s were used. SCID mice treated with 34-1-2s underwent severe shock, lung damage (increased wet/dry ratios) and 40% mortality within 2 hours. Treatment with 2 g/kg IVIg 18 hours before 34-1-2s administration completely protected the mice from all adverse events. Treatment with IVIg after symptoms began also reduced lung damage and mortality. While the prophylactic IVIg administration did not affect 34-1-2s-induced pulmonary neutrophil accumulation, bone marrow-derived neutrophils from the IVIg-treated mice displayed no spontaneous ROS production nor could they be stimulated in vitro with fMLP or 34-1-2s. These results suggest that IVIg prevents murine antibody-mediated acute lung injury at the level of neutrophil ROS production and thus, alleviating tissue damage

Spine-Kinematics with Constraint Guidance for Robot-Supported MIS-Instruments

Feedback of interaction forces/torques in robot supported minimally invasive surgery (MIRS) meanwhile is a widely accepted advantage. To avoid parasitic effects on the according force/torque sensor, e. g. due to friction in the trocar, a sensor integration as distal as possible is advisable. Since common sensor principles are based on wire or fibre connection and since an axisymmetrical instrument's distal end has to be actuated in at least one additional degree of freedom (DoF) for full dexterity inside the patient, cable (or fibre) break is a serious problem. A constraint guided spine-kinematics without rotatory DoF at its distal end is proposed to reduce the danger of cable (or fibre) break due to a curved flection instead of a sharply bending joint. The properties of a constraint spine-kinematics with one DoF adapted to the special requests of an in-house developed MIRS-system is presented, verification data acquired in a specially developed test bed are shown. The results seem suitable for MIRS applications and for a progress towards a 2 DoF solution with the presented constraint principle

The current state of facial prosthetics – A multicenter analysis

Even though modern surgical techniques are dominating reconstructive facial procedures, the capability to use facial epitheses for reconstruction is still an important skill for the maxillofacial surgeon. We present an international multicenter analysis to clarify which techniques are used to fixate facial prostheses. We contacted all maxillofacial departments in Germany, Austria, Switzerland and Norway which were registered with the German society for oral and maxillofacial surgery (DGMKG). These centers were asked via electronical mail to provide information on the type of epithesis fixation systems currently in use. The return rate from 58 departments was 43.1% (n = 25). Overall, implant fixation was the preferred fixation system (92%). Plates were the second most common fixation technique (32%). No centers reported the standard use of non-invasive fixation techniques for permanent epithesis fixation. The main retention systems in use were magnets (24/25), other retention systems are used much less often. The current preferred fixation technique for facial epitheses consists of implant-based, magnet-fixated epitheses. For nasal prostheses, a plate-based, magnet-fixated system is often used. (C) 2015 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved